撓性聯軸器鋼片加長型
| 規格 | D1XD2/公差 | K | B | E | F | L | G | M | |
| min | max | ||||||||
| CMC-20C | 4 | 8 | 20 | 9.2 | 1.7 | 5.5 | 27.3 | 5.8 | M2.5 |
| CMC-27C | 5 | 10 | 27 | 11 | 2.45 | 8 | 34.9 | 9.6 | M3 |
| CMC-35C | 6 | 14 | 35 | 12 | 3 | 8 | 38 | 12.5 | M3 |
| CMC-40C | 8 | 16 | 40 | 15 | 3.95 | 10 | 47.9 | 14 | M4 |
| CMC-45C | 10 | 19 | 45 | 15 | 3.95 | 10 | 47.9 | 16.5 | M4 |
| CMC-50C | 10 | 22 | 50 | 20 | 4.7 | 12 | 61.4 | 17.5 | M5 |
| CMC-56C | 12 | 25 | 56 | 20 | 5.2 | 12 | 62.4 | 20.8 | M5 |
| CMC-68C | 14 | 32 | 68 | 24 | 5.25 | 15.5 | 74 | 26 | M6 |
| CMC-82C | 19 | 35 | 82 | 29.8 | 8.8 | 21.5 | 98.7 | 31 | M8 |
| CMC-94C | 22 | 42 | 94 | 30 | 9.4 | 22 | 100.8 | 37 | M8 |
| CMC-105C | 25 | 45 | 105 | 30 | 10 | 70 | 102 | 42 | M8 |
單位：mm
| 規格 | 常用扭力 (N.m) |
最大扭力 (N.m) |
容許角度偏差 | 最高轉速 (rpm) |
慣性矩 (kg.m²) |
重量 (g) |
||
| 偏心(mm) | 偏角(o) | 軸向位移(mm) | ||||||
| CMC-20C | 0.8 | 1.6 | 0.10 | 2 | ±0.10 | 10000 | 0.58 X 10⁻⁶ | 15 |
| CMC-27C | 1.8 | 3.6 | 0.15 | 1 | ±0.33 | 10000 | 3.41 X 10⁻⁶ | 35 |
| CMC-35C | 4 | 8 | 0.17 | 2 | ±0.40 | 10000 | 11.3 X 10⁻⁶ | 62 |
| CMC-40C | 6 | 14 | 0.23 | 2 | ±0.50 | 10000 | 26.3 X 10⁻⁶ | 116 |
| CMC-45C | 10 | 20 | 0.23 | 2 | ±0.60 | 10000 | 41.7 X 10⁻⁶ | 131 |
| CMC-50C | 16 | 32 | 0.02 | 2 | ±0.35 | 10000 | 75.0 X 10⁻⁶ | 150 |
| CMC-56C | 25 | 50 | 0.27 | 2 | ±0.80 | 10000 | 136.1 X 10⁻⁶ | 310 |
| CMC-68C | 60 | 120 | 0.31 | 2 | ±0.90 | 10000 | 366.9 X 10⁻⁶ | 565 |
| CMC-82C | 100 | 200 | 0.52 | 2 | ±1.10 | 10000 | 1070 X 10⁻⁶ | 1300 |
| CMC-94C | 180 | 360 | 0.52 | 2 | ±1.30 | 10000 | 1750 X 10⁻⁶ | 1500 |
| CMC-105C | 250 | 450 | 0.52 | 2 | ±1.48 | 10000 | 2750 X 10⁻⁶ | 1740 |
| 文件名稱 | 下載 |
|---|---|
| 聯軸器 CMC-20C |
   |
| 聯軸器 CMC-27C |
|
| 聯軸器 CMC-35C |
|
| 聯軸器 CMC-40C |
|
| 聯軸器 CMC-45C |
|
| 聯軸器 CMC-50C |
|
| 聯軸器 CMC-56C |
|
| 聯軸器 CMC-68C |
|
| 聯軸器 CMC-82C |
|
| 聯軸器 CMC-94C |
|
| 聯軸器 CMC-105C |
|